Daily Archives: August 19, 2016

Insulation: Another Way to Save Energy Costs

Pipe and building insulation are proven strategies to reduce energy usage and, therefore, costs. Don’t try this at home or at work, but imagine how hot a metal pipe in steam or hot water service is and then imagine the reduction in heat loss when it is properly insulated. That heat loss stays inside the pipe with the steam or hot water, making it more effective and necessitating less energy usage (fuel combustion) to produce that steam or hot water. Properly and completely insulating a bare surface in steam or hot water service can easily reduce heat losses by over 90% and therefore, reduce your need to produce steam or hot water significantly, saving you fuel costs, improving safety (workers not touching the hot pipes), and reducing emissions of greenhouse gases and of toxics that may impact your plant and neighbors.

To illustrate the cost-effectiveness of insulating pipes in steam or hot water service, see this example. A facility produces and pumps steam at 350°F from an oil-fired boiler operating at an average efficiency of 80%. Oil is purchased at $2.50 per gallon. The 4-inch steam header is insulated with 2 inches of fiberglass pipe insulation. The North American Insulation Manufacturers Association (NAIMA) has software to estimate the energy savings. Let us say that the insulation reduced heat loss from that bare pipe by 95%. Assuming the boiler is used only during the heating season, this can easily save the building $100-$150 per foot per year, for the avoided cost of oil not combusted to replace the lost heat. This figure can be much higher if the cost of oil rises or if the boiler is used for other purposes and is used all year. This also reduces greenhouse gas emissions significantly, too.

Savings can also occur for cold piping, too. Cold water – from electric chillers – transported through pipes can be insulated to save the use of these chillers, reducing electricity usage. While oil prices are relatively low these days, electricity prices are at all-time highs and projected to rise even more. Anything that can be done to reduce electric usage, will save you money.

August is the time of year many buildings – residences, offices, and industry – check their boilers and chillers to make sure they are maintained so they run reliably in the upcoming months. Part of your evaluation should be whether there are pipes that are uninsulated or with insulation that is cracking and damaged. Of course, look out for asbestos and, if present, make sure its removal is managed professionally and via the law. If you see such areas that are uninsulated, underinsulated, or insulated with damaged or cracked insulation, now is the time to re-insulate it properly. That extra time and cost for insulation will be paid for in savings this winter.

CCES has the experts to perform an energy audit of your building, and examine this and many other energy issues to help you save energy and other costs reliably and effectively. Contact us today at 914-584-6720 or at karell@CCESworld.com.